发布时间：2018-10-22 10:32:46 发布来源：http://www.jundazhuangshi.com
New house decoration super house decoration process
The decoration of the new house is both exciting and worrying. The exciting thing is that at last we have our own house, and we can decorate the house as we like. It's a simple mistake because we don't understand the decoration process of the new house at all. If you are not expert in decorating, you should still look for an adornment company to do it. If the funds are not sufficient, it is still more likely to refer to other people's plans and make their own plans to save the cost of planning.
1. housing planning
Regardless of the new house, is still the old house, the first step before decoration is to carry out a specific measurement of the house, in order to clear the decoration process touched the scale, area and furniture appliances location, such as tile area, wall top paint area, wallpaper area, floor area and so on. After measuring the house, we can start planning, determine the style of house planning, analyze the difficulties in planning, and count the number of decorative main and auxiliary materials.
2. kitchen and bathroom ceiling and cabinet device
After the completion of the oil worker, the hard fitting part is completely finished, and now it is in the installation stage. Kitchen and bathroom ceiling, including dampproof ceiling lamp, exhaust fan and bath bully, is the best time to end. The cabinet device touches the sink and the gas stove. Before the device, the property should be contacted to clear the gas. After installing the gas stove, the gas should be tested.
3. wooden door device
Wooden doors need to be reserved in advance, and generally with the window cover, measurements, and so on cabinet device, can be installed wooden doors, the door lock, to suck hardware fittings at the same time.
4. floor unit
After the wooden door is installed, the floor can be installed. Before the floor is installed, be sure to admit that the ground is flat, clean and boring. When the floor device to reserve contraction joints, in addition to the floor and the wall between the floor to reserve about 1 cm floor expansion joints. The gap between the floors should also be reserved, generally not more than 1 mm, when the density of higher floor laying, each should leave a gap of 0.4 mm, in order to prevent future arch deformation.
5. wallpaper paving
After the flooring is installed, the whole house is completely tidied up once, and the room is kept clean and the floor is maintained so that wallpaper can be laid. Before the wallpaper is laid, it is better to apply a layer of polyester paint on the wall to prevent the wallpaper from dampness and mildew; when the wallpaper is laid and pasted, clean towels should be prepared to clean the glue mixture. When the paving is finished, the wallpaper is dry.
6. radiator device
After the wallpaper shop is pasted, the radiator can be used in accordance with the principle of who gets dirty first, and the wooden doors - floor - Wallpaper - radiator is pervasive in the approved installation sequence.
7. switch socket and lamp installation
Owners need to know the number and orientation of switch sockets in each space when decorating, in order to prevent workers in the wallpaper shop to forget to leave empty markings, all the wallpaper pasted up. It is equal to the safety of lamps and lanterns. It is better to turn off the switch and turn off the electricity before installing the device.
8.. Hardware hardware and window cloth pole
Hardware sanitary ware includes sink, tap, lock, water pipe fittings, toilet, clothes hanger and so on. It is better to buy a complete set of the same brand to prevent loss before choosing. Then you can install the window bar. Before the window bar device, the position of the device must be determined. That is the height and width of the device. The width of the window bar can be determined by the width of the window, which is more than 20-30cm on both sides of the width of the window. The device height of the window cloth pole is different from that of the dark pole. The device height of the bright pole is in the central position from the ceiling to the top of the window frame. The dark pole is in the top of the window cloth box, or in the arbitrary part of the window cloth box.
Jinan Junda Decoration Co., Ltd., the Jinan decoration company interested in friends can pay attention to our http://www.jundazhuangshi.com, more wonderful home decoration content please look forward to.