发布时间：2018-10-20 10:34:38 发布来源：http://www.jundazhuangshi.com
The orientation and layout of Ji'nan home decoration air conditioning device should be fully considered.
1. Leakage of indoor unit connecting pipe: Inspection method: After the air-conditioning device is finished, immediately run the air conditioning (refrigeration), if the operation of a certain time without water droplets leakage, there will be no leakage problem at all. Of course, it is also possible to ask the device personnel to carry out a leak check to arrive at the intention of the safety device.
2. leakage of fluoride: inspection method: refrigerant leakage should be checked before testing. Leak detection is mainly aimed at the 4 interfaces of the internal and external pipes of the air conditioner and the valve opening of the globe valve.
3. leakage of electricity
Check method: to see whether the device personnel with the relevant power testing tools, and power security testing.
4. Installation azimuth: indoor machine generally requires the fuselage from the ground 1.8-2.2 meters, the air outlet of the internal machine can not have obstacles within 60 cm.
同 时对室外机也有要求，室外机应尽量避开油烟重、风沙多、阳光直射、散热不畅或有高温热源的当地，还要避开易燃气体简单走漏、有激烈腐蚀性气体、有人工强电 或磁场直接作用等;其装置架底部距地上的间隔应大于2.5米，直接落地时应罩上自做的隔离金属网罩，让儿童不易触及，如装置在窗台下面，要防止高于窗 台;装置支架要有便于安全装置和修理的操作空间。
At the same time, there are also requirements for outdoor units, outdoor units should be as far as possible to avoid the heavy smoke, sandstorm, direct sunlight, heat dissipation is not smooth or high-temperature heat source of the local, but also to avoid easy leakage of flammable gases, strong corrosive gases, artificial strong electricity or magnetic field, etc. The bottom of the device rack should be more than 2.5 meters away from the ground. When landing directly, a self-made metal mesh shield should be covered so that children can not easily touch it. If the device is under the windowsill, it should be prevented from being higher than the windowsill. The device bracket should have an operating space convenient for safety device and repair.
5. Noise: In the device, the inner machine wall plate is not nailed firmly, the internal machine is not fixed dead, simply lead to excessive noise phenomenon. In this case, the device personnel simply find and correct the problem through the test machine.
Together, filter dust evaporator condenser dirt blocking, air supply is not smooth, will lead to increased air supply noise. The lack of fluorine in the system will cause abnormal noise of the compressor. Therefore, after a long period of shelving air conditioning, before the use of air conditioning, should be completely clean air conditioning, together with a healthy indoor environment.
The orientation and layout of air conditioning devices should be fully considered so that airflow can be organized reasonably and Xiao Chang.
Ji'nan home decoration company tells you that the following places are best to avoid:
Flammable gases leak out of the local or intense corrosive gas environment; artificial electric field, magnetic field directly acting on the local; prone to noise, oscillation of the local (e.g. air conditioning installed in the outstanding balcony will occur strong resonance, noise. Generally, under the windows of the bedroom, the noise will be greatly reduced through the windows and walls.
It is easy to clean, repair and cover the air-conditioner in the future, and it is easy to reach under the windows. In places with poor natural conditions (such as lampblack, sand, direct sunshine or high-temperature heat source can make the air-conditioner not refrigerate in time, cool air is not cold); in places where children are easy to touch. Moreover, it is best not to install devices on a snowy day.
Air conditioning outdoor units should be as far away from adjacent doors, windows and green plants as possible, and the space between the relative doors and windows should not be less than the following value: the additional cooling capacity of air conditioner is not more than 4.5 KW is 3 meters, more than 4.5 KW is 4 meters.
The installation surface should be strong and robust with satisfactory load bearing capability. For example, in a narrow room, an air conditioner should be installed on a long wall instead of a short wall.
Because indoors installed on the "short wall" simply cause wind short circuit, this will affect the cooling effect. When the installation surface is the old wall or roof of a building, it is necessary to have solid bricks, concrete or the equivalent strength of the installation surface. Attention should also be paid to the quality of supporting bracket for air conditioner.
The pipeline must be connected more slowly.
Air-conditioning intake and exhaust copper pipes are like arteries that carry blood circulation. They are not allowed to show any pits, trachoma and other defects, or they will not work properly. Its connection with indoor and outdoor interfaces is the key to air conditioning equipment, but also the most reflective equipment personnel skills.
Jinan Junda Decoration Co., Ltd., the Jinan decoration company interested in friends can pay attention to our http://www.jundazhuangshi.com, please look forward to more