济南家装装修公司带你认识木门质量! - 疑问解答
公司简介 | 加入收藏 您好!欢迎来到济南骏达装饰有限公司官方网站!

效果图展示

当前位置:Product

首页 > 新闻动态 > 疑问解答 >
  第一掂分量(轻重是否适宜) 好的木门不宜太轻。几种同样规格、同样面层材种的木门相比,分量太轻的木门很难说是优质木门。分量太轻的原因是所选用芯材的材质比较松软(比如杨木),木材中的管道和孔隙比较大。又或者是里面的芯材过少,使得木门不够结实。此种木门的强度及抗冲击性比较差,隔音效果也不好。
  A good wooden door should not be too light. Compared with several kinds of wooden doors with the same specifications and the same surface layer, the wooden doors with too light weight can hardly be said to be high-quality wooden doors. The reason why the weight is too light is that the core material is soft (e.g. poplar), and the pipes and voids in the wood are relatively large. Or maybe the core material inside is too little, which makes the wooden door not strong enough. The strength and impact resistance of this kind of wooden door are poor, and the sound insulation effect is not good.
  第二看外观(漆面及木皮) 优质木门漆面饱满平滑、丰润自然、漆膜透明性好,表面材种的纹理清晰逼真,外观物理性状一览无遗。劣质木门漆膜干瘪晦涩,露漆、鼓泡、针孔、波纹、粒子等较多,漆膜透明性差,表面纹理模糊不清,木材外观性状晦涩难辨。劣质木门之所以如此,一方面是因为生产厂家选用的油漆质量较差,工艺和设备不过关;另一方面是其选用的木皮瑕疵多,因此故意降低涂层的透明度,以掩盖表面存在的死节、孔洞、腐朽、变色、裂痕、压痕等瑕疵。
  Second, look at the appearance (lacquer and veneer) of high-quality wood doors with full and smooth finish, rich and natural, transparent paint film, clear and lifelike texture of surface materials, and a glance at the physical properties of the appearance. Low-quality wood door paint film is dry and obscure, dew paint, bubbles, pinholes, ripples, particles and so on are more, the transparency of paint film is poor, the surface texture is blurred, and the appearance of wood is obscure and difficult to distinguish. The reason why inferior wooden doors are so bad is that the paint quality chosen by manufacturers is poor and the technology and equipment are not up to standard. On the other hand, there are many defects in the wood skin chosen by manufacturers, so the transparency of the coatings is intentionally reduced to cover up the defects such as dead joints, holes, decay, discoloration, cracks and indentations on the surface.
济南家装装修公司
  第三看木皮或实木拼接处 优质木门的木皮或实木拼接处加工比较精细,看不出结合痕迹。劣质木门的,木皮或实木拼接处明显,甚至有开裂和错位现象。
  Thirdly, it can be seen that the processing of the bark or solid wood joints of the high-quality wooden doors is relatively fine, and no trace of the combination can be seen. Low-quality wood doors, wood or solid wood joints are obvious, and even cracks and dislocations.
  第四看木门平整度 优质木门对材料选择、工艺控制及出厂检验要求严格,成品木门表面平整笔直。安装后外形完美。劣质木门则对材料、工艺及检验的要求低,成品木门的翘曲度较大,安装后明显可以观察到木门与门框不能对整齐。
  Fourth, high-quality wooden doors have strict requirements on material selection, process control and factory inspection. The finished wooden doors have flat and straight surfaces. Perfect appearance after installation. Low-quality wooden doors have low requirements for materials, technology and inspection. The warpage of finished wooden doors is large. It is obvious that wooden doors and doorframes can not be neat after installation.


上一篇:装修房子越来越贵的原因!
下一篇:节省瓷砖用量的方法!
  • 装修材料的通用...
  • 家装窗户要用断...
  • 客厅装饰的一些...
  • 济南家装装修的...
  • 济南家装装饰空...
    • 返回顶部
    • 15806619313
    • 微信二维码
      关注你附近