发布时间：2019-09-09 11:09:22 发布来源：http://www.jundazhuangshi.com
Many people choose wooden floor furniture, and the most feared wooden floor is blisters and fires. Wood floor if immersion water treatment is not good, will cause mildew at the bottom of the floor, and eventually lead to the deformation of the whole floor. So if the wooden floor immersed in water how to deal with it? Today, Jinan Home Decoration Company Xiaobian to learn about it!
1. Small area, immersion
Floor immersion water, the first thing to do, of course, is dry water, first wipe the water on the floor surface with dry cloth, you can choose a practical vacuum cleaner under the water-soaking floor splicing gap to absorb steam or cold wind files, use a hair dryer to dry; secondly, you can use some clogs to press small areas of deformed areas, after a period of time wooden floor The board can resume normal movement. If after a period of time, the seams are wrapped by rollers, but they are too far away from the floor, they can try to waxing the floor. After waxing, the floor of foam water will basically be very different from the original. If the color, shape and original state of the floor are very different after waxing, the floor can only be partially replaced.
2. The floor is wet through.
If there is a large area of water soaking phenomenon, so we can not deal with simple, should pry the floor carefully rise, according to the "um" superimposed on the ventilated place in the shade of the tree, the weight of the superimposition to prevent deformation, better quality of solid wood floor can be used again in general circumstances.
3. Laminated floor immersion
无论是大面积泡水还是小面积浸泡水，都不建议提高强化地板撬气，那样轻易对强化地板造成损害，很可能造成无法再使用的严重后果。最好迅速排水地板表面的水,然后把地板的踢脚线,伸缩接头,伸缩缝完成将散发水蒸气,但是根据不同浸水量大小、枯竭通常需要7 - 15天左右,为更好的质量或浸泡时间不长的产品可以恢复,如果仍然不能恢复后15天应该考虑更换。
Whether it is large area soaking water or small area soaking water, it is not recommended to improve the strengthening floor prying air, which easily causes damage to the strengthening floor, and may cause serious consequences that can not be reused. It is better to drain the water on the floor surface quickly, and then the floor kick line, expansion joint and expansion joint will emit water vapor. But according to the different size of water immersion and exhaustion, it usually takes about 7-15 days. For better quality or products with short immersion time, it should be replaced 15 days after they can not be restored.
4. Adding keel, small area immersed solid wood floor
If the water is slightly larger, not only the leaking board should be prized, but also the opposite board should be prized along the direction of keel row, so that the internal air circulation can take away water. If you can't determine the size of the water, it's better to pry up the board along the current, look at the wet situation and make sure.
5. Preventing Floor Water
After all, rescue after the event is passive, and rainy days are the best choice. Usually pay more attention to the windows do not open large to prevent rain; often check whether air conditioning, pipes and washing machines are leaking. At present, floor wax mainly plays the role of cleaning and maintenance, can not completely waterproof, so it is necessary to do pre-prevention.