发布时间：2019-03-29 14:39:51 发布来源：http://www.jundazhuangshi.com
The owners of the first decoration, most of them are vague about the installation of switches and sockets, do not know that this seems to be the same thing in every family but different! If you know the layout strategy of the whole house switch sockets in advance, you will never regret it after decoration! Today, let's look at the reasonable planning of switch sockets with the world and small weavers.
I. Planning the number of switch sockets
The number of electrical appliances in each household is different, and the number of natural switch sockets can not be the same. First of all, we should determine the number of switch sockets needed for home, list the household appliances used in each space one by one, and then determine the number of switch sockets.
II. Planning the Installation Location of Switch Sockets
After determining the switch socket in the previous step, the next step is to determine its installation location. The position determination of switch socket usually needs to consider the position and size of electrical appliances and furniture and the living habits of family members.
1. Switch Position Planning
The position of the switch is generally easy to determine. For example, the switch of the lamp is generally 1.2 m to 1.4 m above the ground and should be installed at the same height, with a difference of no more than 5 mm. The position of the switch should take into account the family's habits, such as most people are accustomed to using the right hand, so generally open the door to the right.
2. Location planning of sockets
The location of the socket is more complicated than that of the switch. The position and size of the electrical appliances and furniture have a great influence on the location of the socket. For example, there is no special requirement for the ordinary socket to be 0.3m away from the wall and installed at the same height, and the difference is not more than 5mm.
III: Other Planning Notes
When considering the installation of switch sockets, the more comprehensive the better. If the planning and installation are reasonable, it will bring great convenience to future life.
1. Consider installing double-control switch in part of position
For stairs up and down two floors, bedroom doors and bedside, the larger living room on both sides, the use of double-control switch is very convenient. For example, the bedroom entrance and bedside are separately switched to facilitate the control of indoor lighting when entering the door and sleeping.
2. Some electrical outlets with switches
Almost all household appliances have standby power consumption, you can use some sockets with switches, so as to save the trouble of pulling plugs back and forth, and not to pull out the wires hanging affect the beauty. For example, we can consider using sockets with switches on the cabinet counter to avoid frequent plugging of kitchen appliances such as microwave ovens and rice cookers.
3. Attention should be paid to the splash-proof cover for some area switch sockets.
Switch sockets should not be installed too close to water. If they are installed in open balcony, near the sink and other places, remember to use special anti-splash cover for switch sockets.
4. Appropriate consideration of long-term needs ahead of time
When determining the number and position of switch sockets, it should be considered in advance appropriately, with an advanced vision and long-term needs. If the shoe cabinet may need to install shoe dryer in the future, the toilet may change to smart toilet in the future, so as far as possible to consider the long-term needs of the place to set up some spare sockets. In addition, families with children, it is best to use protective devices.
Avoid using a few sockets handy, reasonable layout to make life more convenient.
If you have the need for decoration or don't understand the place, you can click on our official website of Jinan Home Decoration and Decoration Company to consult: http://www.jundazhuangshi.com.